The figure shows a circuit that contains three identical resistors with resistance $R = 9.0 \,\Omega$ each,two identical inductors with inductance $L = 2.0 \,mH$ each,a capacitor $C$,and an ideal battery with $emf \,\varepsilon = 18 \,V$. The current $i$ through the battery just after the switch is closed is:

$A$ circular insulated copper wire loop is twisted to form two loops of area $A$ and $2A$ as shown in the figure. At the point of crossing,the wires remain electrically insulated from each other. The entire loop lies in the plane of the paper. $A$ uniform magnetic field $\vec{B}$ points into the plane of the paper. At $t=0$,the loop starts rotating about the common diameter as an axis with a constant angular velocity $\omega$ in the magnetic field. Which of the following options is/are correct?
[$A$] The rate of change of the flux is maximum when the plane of the loops is perpendicular to the plane of the paper.
[$B$] The net emf induced due to both the loops is proportional to $\cos \omega t$.
[$C$] The emf induced in the loop is proportional to the sum of the areas of the two loops.
[$D$] The amplitude of the maximum net emf induced due to both the loops is equal to the amplitude of maximum emf induced in the smaller loop alone.

$A$ conducting loop having a capacitor is moving outward from the magnetic field. Which plate of the capacitor will be positive?

In a coil of resistance $10\,\Omega$,the induced current developed by changing magnetic flux through it is shown in the figure as a function of time. The magnitude of change in flux through the coil in weber is:

$A$ coil of wire having finite inductance and resistance has a conducting ring placed coaxially within it. The coil is connected to a battery at time $t = 0$,so that a time-dependent current $I_1(t)$ starts flowing through the coil. If $I_2(t)$ is the current induced in the ring and $B(t)$ is the magnetic field at the axis of the coil due to $I_1(t)$,then as a function of time $(t > 0)$,the product $I_2(t) B(t)$:

$A$ coil and a bulb are connected in series with a $DC$ source. $A$ soft iron core is then inserted into the coil. What happens to the intensity of the bulb?